Shipping within 24-72h*
100% Money Back Guarantee
30 days return policy
Shop By Categories
rdl st-lcr3 logic controlled relay - dual alternate pulse

rdl st-lcr3 logic controlled relay - dual alternate pulse

BrandsRADIO DESIGN LABS
Product Code:
SKU : 9SIAZF8FUC3888
Product available in stock : 56
  • 186€


Free shipping from € 1000,- order value
Shipping within 24-72h*
30 Day Money Back Guarantee

Product Bullets

  • Pulse at the Start of a Logic Signal.
  • Pulse at the End of a Logic Signal.
  • Relay Contact and Open/Collector Pulse.
  • Active High or Active Low Inputs.
  • Input Control Voltage From 3.3 to 24 Vdc.

Product Info

The ST-LCR3 is ideally suited to applications where momentary pulses are needed from a single control signal. The module provides a momentary pulse when a logic signal at its input first becomes active. A separate momentary pulse is provided when the logic signal at the module input becomes inactive. Two logic inputs are available on the ST-LCR3. Either of these inputs may be used. Terminal 1 is internally pulled high to +5 Vdc. This input becomes active when an external closure or open-collector pulls the terminal to ground. The external switching device does not need to pull the terminal high, however the terminal may be pulled high with any voltage from + 3.3 Vdc to +24 Vdc without any risk of damage to the ST-LCR3 input.

Terminal 3 is internally pulled to ground. This input becomes active when an external closure or logic device applies a positive voltage from + 3.3 Vdc to + 24 Vdc. When the input being used first becomes active the START PULSE output from the module is triggered. When the input first becomes inactive (after first being active) the END PULSE output from the module is triggered. Both the start and end pulses have a nominal duration of 250 ms. Each pulse output provides both an open-collector SLAVE terminal and relay contacts. The SLAVE terminal may be used to control other RDL modules and a variety of other equipment.

The relay contacts may be used to control modules or equipment that do not operate from open-collector control.



Additional Information
Date First Available September 16, 2021

Write a review

Note: HTML is not translated!
    Bad           Good